To replace the RPM needle on a 2002 Ford Windstar, you'll need to remove the instrument cluster. Start by disconnecting the battery and removing the dashboard trim. Unscrew the cluster and gently pull it out, then carefully detach the needle from the RPM gauge, ensuring not to damage the gauge face. Install the new needle by pressing it onto the shaft, reassemble the cluster, and reconnect everything in reverse order.
About $2500.00
Which plenum-intake or. . . .
Replace freeze plug in a 1998 ford windstar ?
The 2002 Ford Windstar ECU can be found on the firewall in the engine compartment. The ECU will be on the drivers side of the firewall.
I was looking at the 2002 Ford Windstar Owner Guide and it shows : ( 5W-20 is recommended )
According to the 2002 Ford Windstar Owner Guide : ( 98.4 litres / 26.0 U.S. gallons )
That depends what is wrong with it. The first thing to check would be the brake switch.
In a 2002 Ford Windstar : ( # 17 ) is a 20 amp fuse for the cigarette lighter / powerpoint and the Datalink connector
That's your LOW tire pressure warning light in a 2002 Ford Windstar
where can i buy a side window for my 99 ford windstar lx
I don't know how to do it, but the dealer is charging me $2075.00 to replace it on my 2000 Windstar!
i put on Scan cyinder 2 misfire on ford windstar 3.8 liter year 2002