To change the shift linkage in an 1998 automatic Chevy Cavalier the shift linkage needs to be removed from the transmission and pulled from the cabin. The job requires removing the floor console to access the cable. After doing the so the cable can be snaked from inside the cabin, the install is the reverse of the removal.
replace the starter on a 1998 Chevrolet cavalier
Replace shift linkage Replace shift linkage
How do you replace a turn signal bulb in a 1998 cavalier
Below
The shifter linkage might be jammed or disconnected. The shifting sensor, that detects if the brake is engaged, may be malfunctioning.
To change the shifter cable on a 1998 Oldsmobile Silhouette, first you need to disconnect the cable from the shifter, then disconnect it from the engine's control arm. Then replace it with the new cable and make sure it is functioning.
To replace the auto transmission shifter on a 1998 Chevy Prizm, first disconnect the negative battery cable for safety. Remove the center console trim by unscrewing any screws and carefully prying it up to access the shifter. Disconnect the shifter cable and any electrical connectors, then unbolt the shifter assembly from the vehicle. Install the new shifter by reversing the removal process, ensuring all connections are secure before reassembling the console and reconnecting the battery.
To replace the shift cable on a 1998 Oldsmobile Silhouette, first, disconnect the negative battery terminal for safety. Then, remove the center console to access the shift cable, detaching it from the shifter and the transmission linkage. Install the new shift cable by reversing the removal steps, ensuring it is properly secured and connected. Finally, reassemble the center console and reconnect the battery.
The only repair is to replace the head gasket.
The easiest way to reset your 1998 Chevrolet Cavalier theft system is to remove the fuse. Keep the fuse out for 10 seconds and replace it to its original slot.
The 1998 Honda Accord 3.0 liter engine does not have throttle cable. The automobile has throttle linkage. The linkage is connected at each end with a connecting bolt. Remove the connecting bolt to remove the linkage.