0
Obtain new or rebuilt unit. Might also replace the solenoid while you have the starter removed but this will have to be your desicion. Disconnect the negative battery cable from the battery to prevent 'welding' while under the vehicle. You may need to ellevate the vehicle and properly support the vehicle while working under it. Your need will be determined by 4x4 vs 2x4 and your physical size and need for work 'room'. The starter is located on the passenger side of the engine near the exhaust manifold. It is cylindrical in shape(About the size of a small coffee can if it a 'old' style, about the size of a pint can of beer if the 'new' style). There are two bolts(Mine were 14mm heads yours may vary) holding the starter to the engine block. These will need to be removed and the starter supported. Then the wires to the solenoid can be removed. There are generally Two wires to the solenoid. These will require a 5/16" and a 9/16" socket or wrench but yours may be different. Reverse the proceedure to install the new unit. Good Luck with your project.
What else can I help you with?
How do you replace a starter on a 1999 Chevy Suburban?
How do you replace a starter in a 1999 suburban
How do you change a radiator in a 1993 suburban?
How do you replace a radiator in a 1993 suburban?
How do you replace starter 1993 88hp Johnson outboard?
how to replace starter 1993 88hp Johnson outboard
How do you replace a starter on a 1993 Toyota Celica?
bolt pattern for 1993 toyota celica starter
How do you replace a speedometer cable on a 1993 Chevy Suburban?
its electronic, there is no cable
How do you Replace head gasket Chevy Suburban?
what is the preceger for replacing the head gaskets on a 1993 chevy suburban 4x4 350
Where is the starter located on a 2004 Suburban?
where is the starter located on a 2004 chevy suburban
How do you replace a starter on a 49 saville 1993?
its under the intake manifold if its a northstar
How do you replace the starter on a 1993 Acura Legend?
must lower the exhaust system
Where is the starter relay on a 1999 GMC Suburban with a big block?
The starter relay on a 1999 GMC Suburban with the bib block engine is located on the solenoid for the starter. The solenoid for the starter is on top of the starter.
How do you replace the starter on a 1993 Chevy Cheyenne?
Remove the positive battery cable from your 1993 Chevy Cheyenne battery. Remove the two cables from the front of the starter. Remove the three starter retaining bolts. Reverse the process to install the new starter.
Where is the starter in a 1999 gmc Suburban?
In a 1999 GMC Suburban, the starter is located on the driver's side of the engine, mounted to the transmission bell housing. It is positioned near the bottom of the engine, making it somewhat accessible from underneath the vehicle. To replace or inspect the starter, it's often necessary to lift the vehicle for better access.
