Simple!
1. disconnect the battery
2. Crawl under vehicle and remove two 14mm bolts holding starter.
3. Remover signal wire from solenoid
4. Remove main power wire
5. Bring new starter under vehicle with you
6. Replace signal wire
7. Replace power wire
8. put starter into hole.
9. Tighten two 14 mm bolts that hold starter
10. Attach battery
11. Set clock on radio
12. Clean tools
13. Bandage cuts on knuckles
Piece of cake!
is there a fuel cut off switch in an oldsmobile bravada
If you have to ask online, then step 1 is finding a qualified shop that can do it for you.
What are the intake manifold torque specs on 1998 Oldsmobile bravada?"
Yes
R134a
On front cover of engine by crankshaft pulley.
== ==
how do you replace a starter on a 1998 cutlass
Push both buttons at the same time, it will reset to zero.
it is located on the right side of the passenger compartment of the vehicle you would have to remove the whole dash in order to replace it so if you have to ask where it is you probaly won't be able to replace it.
On my 1998 the button is on top of the steering column. Try looking there.
where can i get a diagram for a serpentine tensioner belt for a 1998 Oldsmobile bravada