On the V6 engine the bottom bolt is accessible from under the truck easily but not the top one. You can remove the right front tire and wheel and access it.
Speedometer cable replace 1989 toyota
Replacing a starter on a 1989 Toyota Corolla is not very difficult to do. The wires will need to be disconnected from the old starter and labeled or taped. The starter is held in place by two bolts, unscrew the bolts and remove the old starter. Then replace with the new starter.
TROUBLESHOTING FOR REPLACED STARTER IN TOYOTA COROLLA 1999.
It is attached to the starter itself.Toyo joe
== ==
the starter should be under the intake on the back of the motor.
on a 1989 Toyota truck it should be behind the kick panel, under the ECU
Disconnect the - battery cable Raise and support vehicle Disconnect the wiring at top of starter Remove mounting bolts Remove starter
123456
Passanger side, lower part of the engine.
it does not have an inertia switch.
Look at the rear lower end of the engine