brake light switch is mounted by the brake pedel remove lower panel above brake pedel and then you will see the switch should be able to turn the switch to replace
I have a 98 Concorde. My backup lights stopped working and I had my independent garage mechanic check it out while working on another problem and he told me the switch is internal,inside the transmission housing. I didn't pursue it futher. I'm not about to have them tear into the transmission just to replace a simple switch. Another example of Chrysler's wonderful engineering.
On a 2000 Chrysler Concorde LXi, the trunk light switch is typically located on the trunk lid itself, often near the latch mechanism. This switch is designed to activate the light when the trunk is opened and turn it off once the trunk is fully opened. If the light remains on or does not turn off, the switch may be stuck or malfunctioning and may need adjustment or replacement.
Brake light, on your 2000 Chrysler Concorde, by accessing it from the inside of the trunk. Take hold of the brake light, push in and turn. The brake light will come out.
In the top of the trunk near where the brake light is located, there is a small plastic window, remove it and you access the light bulb.
light bulb out on map light how to change with out breaking plastic lens
The abs computer has detected a malfunction and set a code.
open hood and look at top of head light you will see a screw on 2 sides remove both and light assy will come out if screws will not come out (happens alot) seek prof help
Mine came on on my 2001 Concorde because a rat got to the wires of a sensor, the little bastards did it three times :(
It is on a bracket just above the brake pedal.
usually you only have about 2 gallons.
unhook the neg. cable from your battery and wait 5 minutes
How do you replace a break light switch on 1995 Chevy Tahoe