This would be the best way. Remove top plastic fan shield 4 bolts, remove fan assy(you may have to get special tooling) remove top bar holding Alt. air Comp. move this unit out of the way(left top would be best) remove water pump, IMP> mark were all bolts go, as a serious problem could happen if you put long bolts back were they are not suppose to be. remove damper & pulley 1 1/4" bolt. Your case housing should be free to remove, 3 stud bolts & 1 regular bolt with 2 on bottom of unit. your timing chain should be available to work on. Have fun and patience ,,,
A Dodge Durango does not have a timing belt. It has timing chain. If the timing cover chain gasket is leaking it is normal to change it while changing the water pump.
In order to replace a timing chain for a 2003 Chevy Cavalier, a person will need remove the oil pan, crankshaft pulley and hub, timing cover bolts, and timing cover. Then the timing cover gasket, timing cover and bolts, crankshaft pulley, and oil pan will need to be installed.
you have to take off the timing chain cover and replace the seal in the timing chain cover as welll youll need the oil pan seal
To change the timing chain on a Toyota Echo, first disconnect the battery and remove any components obstructing access to the timing cover, such as the engine mount, alternator, and belts. Then, remove the timing cover to expose the timing chain. Align the timing marks on the crankshaft and camshaft gears, remove the old chain and tensioner, and install the new chain, ensuring proper alignment. Finally, reassemble all components, replace the timing cover, and reconnect the battery.
next to the timing chain you will find it in the cover on front of engine where the water pump is mounted they call it the timing chain cover you will have to remove this cover to get at it
you replace it take the old one off and replace it with a new one
timing chain is inside the timing chain cover which is located between block and water pump. the water pump mounts to the front of timing case There is a cover that is behind the water pump... The timing chain is under that cover.
To replace the timing chain on a Pontiac Montana, first disconnect the battery and remove any components obstructing access to the timing cover, such as the serpentine belt and crankshaft pulley. Then, drain the engine oil and coolant, and carefully remove the timing cover. Align the timing marks on the camshaft and crankshaft gears, then remove the old timing chain and install the new one, ensuring proper tension. Finally, reassemble the timing cover, refill fluids, and reconnect the battery.
To replace the timing chain on a 2004 Honda Rancher, first, disconnect the battery and remove the necessary body panels for access. Drain the engine oil and coolant, then take off the valve cover and crankcase cover to expose the timing chain. Remove the old timing chain and any tensioner components, then install the new timing chain, ensuring it is properly aligned with the timing marks. Finally, reassemble all components, refill with oil and coolant, and reconnect the battery.
The timing chain cover on a 4.6L is the whole front of the engine. drl
The seal on the timing chain cover must be pressed out and the replacement pressed in.
To replace the timing chain on a 1999 Ford Contour, first ensure the engine is cool and disconnect the battery. Remove the necessary components, including the engine cover, accessory belts, and timing chain cover. Align the timing marks on the crankshaft and camshaft gears before removing the old timing chain. Install the new timing chain, ensuring proper alignment of the timing marks, and reassemble all components in reverse order, making sure to torque bolts to the manufacturer's specifications.