To replace the upper and lower radiator hoses on a 1991 Geo Prizm, first ensure the engine is cool and then drain the coolant from the radiator. Using a screwdriver, loosen the hose clamps at both ends of the upper and lower hoses, then carefully remove the hoses. Install the new hoses by sliding them onto the radiator and engine fittings, securing them with the clamps. Finally, refill the radiator with coolant and check for leaks.
Remove fan shroud Drain radiator Remove upper and lower radiator hoses Remove upper mounting bolts Lift radiator out of lower support cradle
Upper is hose connected to top of radiator, lower is hose connected to bottom of radiator.
Under the housing where the upper radiator hose hooks to the engine.
If your truck is overheating!!! Then check the upper radiator and lower radiator hose's , if the lower is cooler the the upper the either the thermostat is not opening or the radiator is clogged
Remove the upper and lower radiator hoses and transmission lines from the radiator. Remove the fan shroud and the upper and lower bolts. Raise the radiator up and out.
To replace the radiator in a 1988 Cabriolet, first, ensure the engine is cool and disconnect the battery. Drain the coolant by removing the drain plug or lower radiator hose, then detach the upper and lower hoses from the radiator. Remove any mounting bolts or clips securing the radiator, lift it out, and replace it with the new radiator. Reconnect the hoses, refill the coolant, and reconnect the battery before starting the engine to check for leaks.
Upper and lower radiator, inlet and outlet heater core, bypass,Upper and lower radiator, inlet and outlet heater core, bypass,
remove electric fan drain coolant remove upper and lower hose remove what ever else may be blocking the radiator from being removed remove radiator reverse
upper and lower end of radiator
Four cylinder, under the housing where the upper radiator hose attaches. Six cylinder, under the housing where the lower radiator hose attaches to the engine.
The lower radiator hose is exposed the more weather.
1.drain engine coolant 2.remove the upper and lower radiator hoses, and the atf cooler hoses 3.disconnect the fan motor connectors and ect switch connector 4.remove the radiator upper brackets, then pull up the radiator 5.remove the fan shroud assemblies and other parts from the radiator install the radiator in the reverse order of removal set the upper and lower cushions securely fill the radiator with engine coolant and bleed air