0
To replace the water pump on a 2012 Malibu LT, first, disconnect the battery and drain the coolant. Remove the serpentine belt, then unbolt and remove the water pump from the engine block. Clean the mating surfaces, install a new gasket, and position the new pump before tightening the bolts to the specified torque. Reassemble in reverse order, refill the coolant, and reconnect the battery before testing for leaks.
What else can I help you with?
How do you replace a water pump on a 1998 Chevrolet Malibu?
take it to a mechanic
Do you need to replace the timing chain when you when replace the water pump on your 97 Chevy Malibu 3.1 liter?
no!
How do you replace the water pump on a 2002 Chevy Malibu LS 6 cylinder?
Drain the water from your 2002 Chevrolet Malibu cooling system. Remove the water pump return hose. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
How to replace the fuel pump on a Chevy Malibu?
How do you change the fuel pump on a 2003 Chevy Malibu?
97 Chevy Malibu 4 cylinder replace water pump?
The water pump on a 97 Chevy Malibu 4 cylinder is replaced by removing the engine accessories, drive belt, and radiator hoses. The pump can then be unbolted, removed, and a new pump installed.
How do you know if the water pump is OK on a 2000 Chevy Malibu?
if it is not making any noise,or leaking from bottom of pump. Releif hole is on bottom of pump,if leaking replace pump.
How do you change the water pump on a 1997 Chevy Malibu V6?
How do you change the water pump on a 1997 chevy malibu?
Back up light wiring 1996 f250?
how to replace water pump on a 1999 chevy malibu 2.4
Do you need to remove the timing chain to replace the water pump on a 97 Chevy Malibu with a 2.4 engine?
yes
What is the housing called that the water pump slips into in a 2002 Malibu?
A northstar hose can cause the water pump to slip. This is in a 2002 Malibu.
How do you replace water pump on a 1998 Malibu four cylinder?
To replace the water pump on a 1998 Malibu with a four-cylinder engine, start by disconnecting the negative battery cable and draining the coolant. Remove the serpentine belt, then detach any components obstructing access to the water pump, such as the alternator or engine cover. Unscrew the water pump bolts, carefully remove the old pump, clean the mounting surface, and install the new pump with a new gasket. Finally, reassemble everything, refill the coolant, and check for leaks.
How long should it take to replace a water pump in a 1999 Malibu LS V6 J engine?
Depends on your experience & tools.
