Drain coolant into a clean container. Follow the upper radiator hose to the engine block it connects to the housing for thermostat here. Remove two bolts and carefully pull up on the housing. install in the reverse. put new coolant.
where do the thermostat go in my 93 buick lesabre
Where is the thermostat on a 1997 chevy suburban and how do you change it?
remove the 2 bolts on the neck that the upper hose goes to.
NO.You can only use a 93 or 94 only
follow the top radiator hose to the engine,that bracket where the hose ends is the thermostat housing,remove that and the thermostat is under it,dont fix it replace it
This link has detailed instructions and photos http:/www.lincolnvscadillac.com/tech/lincoln-mark-viii/Thermostat-Replacement/index.htm
Very simple, follow the top radiator hose to where it ends, there will be a silver thermostat housing there with 2 bolts. Remove the 2 bolts and replace the thermostat. Make sure you put it back in the same way it was taken out.
Replace your thermostat.
On a 1993 Toyota Camry Vienta, the thermostat can be easily located by following the lower radiator hose to the point where it attaches to the engine. When replacing the thermostat, always replace gaskets as well.
How do you replace a starter in a 1999 suburban
sure you need to you can do it fast but you will need to add coolant and myu advice is to when you need to replace the thermostat its the time to replace the coolant
10000LB on the 93 GMC Suburban 2500 with the 5.7L Engine