0
To replace the water pump on a 1994 Chrysler LeBaron with a V6 3.0 engine, first disconnect the negative battery cable and drain the coolant. Remove the serpentine belt, then take off any components blocking access to the water pump, such as the timing cover or bracket. Unbolt the water pump from the engine block, clean the mating surfaces, and install the new pump with a new gasket. Reassemble everything in reverse order, refill the coolant, and reconnect the battery.
What else can I help you with?
How do you replace the water pump on a 1994 Chrysler LeBaron 3.0L V6?
the water pump is locate in back of the motor bracket on the left side of the engine it take about 4 hours to remove it
What type of transmission fluid in a 1994 Chrysler LeBaron?
Chrysler ATF+4
What is the oil capacity for a 1994 Chrysler lebaron?
4.5 quarts
Where can you find discounted auto parts on a 1994 Chrysler LeBaron GTC 3.0l?
RockAuto.com has auto parts and body parts for the 1994 Chrysler LeBaron at discounted and wholesaler closeout prices.
Where is the fuel pump located on a 1994 Chrysler lebaron?
In the fuel tank.
Is there a reset for the gas pump on a 1994 Chrysler LeBaron?
No, it does not have a reset switch.
What transmission fluid to use on a 1994 Chrysler LeBaron?
Atf+4
Where is the oil filter on a 1994 Chrysler LeBaron?
Lower radiator side of the engine.
What type of engine oil is used in a 1994 Chrysler lebaron?
5w30 or 10w30
1994 Chrysler lebaron water pump location?
4 cyl driven by the alternator belt. 6 cyl, driven by the timing belt.
Why did the radio stop working on a 1994 Chrysler LeBaron?
Blown fuse or failed radio.
Where is the inertia switch on the 1994 Chrysler lebaron?
Chrysler doesn't use inertia switches. The fuel system is computer controlled with relays
