To replace the water pump on a 1991 Dodge Shadow, start by disconnecting the battery and draining the coolant. Remove the serpentine belt, and then detach any components obstructing access to the water pump, such as the timing belt cover if necessary. Unbolt the water pump from the engine block, clean the mounting surface, and install the new pump with a new gasket. Reassemble all components, refill the cooling system, and check for leaks.
how do i change a water pump in a 1991 dodge shadow with a 2.2 liter does it require an internal water pump
You can find the 1991 Dodge Shadow thermostat in the thermostat housing. The thermostat housing will be on the front of the engine.
Yes it will... you need to switch the flywheels though to mount it to the automatic transmission...
the head will need to come off, thread the belt through and, and tilt the head so that you can slide the belt on
no There is a magnetic pickup on the transmission
Next to the battery.
it should be inline. trace you fuel line back and you should run in to it, it should be silver or clear. if it is not in line, then it is in your tank.
Probably in the fuel tank
Yes, but there is no need to do so.
.035 inches
Fuse labeled instruments.
It would cost about 260 dollars.