Windshield
yes it does it has one on the top and one the bottom
Personally I don't know how to replace a Chevy Blazer windshield, but attached is an article from wikihow that could help you out. If that looks complicated or you can't find the windshield glass check out your local glass shops or websites.
That relay and fuse for the windshield washer should be located in the fuse/relay center under the hood.
Remove the wiring harness from the back of your Chevy Lumina windshield washer pump. Remove the windshield washer pump fluid hose. Remove the windshield washer pump retaining bolts. Reverse the process to install the new windshield washer pump.
2004 Chevy Cavalier windshield washer fluid reservoir retaining bolts. Remove the windshield washer fluid supply tube. The windshield washer fluid reservoir will come free.
The 2000 Chevy Cavalier windshield washer tank is held in place with for retaining bolts. Remove the retaining bolts and the windshield washer tank will come out.
where is the windshield washer fuse located on a 02 chevy truck?
Pretty simple... unplug the power wire from the washer fluid pump, pull off the line for the washer fluid, undo the bolts for the bracket holding the reservoir in, pull the whole thing out. Installation is opposite of reverse. You should be able to look at it and figure it out easily enough.
The windshield washer pump is located on the water reservoir. Remove the wheel on the driver's side and then the cowling around the wheel well that is in front of the wheel. Once it is off, the windshield washer pump on the water reservoir will be visible for easy replacement.
how to replace a heater core in a 1997 Chevy blazer
To replace the windshield washer fuse in a 2006 Chevy Impala, first locate the fuse panel, which is typically found under the dashboard on the driver's side. Open the fuse panel cover and identify the fuse for the windshield washer, usually labeled as "WASHER" in the diagram on the cover. Use a fuse puller or a pair of pliers to remove the blown fuse and replace it with a new fuse of the same amperage. Finally, close the fuse panel and test the windshield washer to ensure it’s working properly.