why is it after I hooked up the linkage for my wipers the wipers stay in the upright position after I turn them off.
To replace the linkage on the driver's side windshield wiper of a 2001 Ford Explorer XL, first, lift the wiper arm away from the windshield and remove the nut securing the wiper to the linkage using a socket wrench. Next, detach the wiper arm and remove the plastic cover from the base of the wiper assembly to access the linkage. Disconnect the linkage from the motor and the other components, then install the new linkage by reversing the process: connect it to the motor, secure it, and reattach the wiper arm and cover. Finally, test the wipers to ensure proper operation.
The non working wiper on the 2001 Century most likely has a broken wiper linkage. The linkage can be checked by removing the vehicles cowling.
how do you replace wiper crank arm 2001 chevrolet impala?
how to replace water pump on 2001 ford ranger
http://forums.vwvortex.com/zerothread?id=3788513
Disconnected or broken control linkage? Bad wiper transmission?
Check for broken or disconnected linkage Bad wiper transmission?
Middle corner near to fuel pipe....
how do you replace a wiper motor in a 2000 jetta?
how to replace wiper transmission assembly on a 2001 tracker
On a 2001 Chevrolet 1500, the wiper motor is located under the windshield cowl, near the base of the windshield on the driver's side. To access it, you may need to remove the cowl cover and possibly the windshield wiper arms. The motor is mounted to the firewall and is typically connected to the wiper linkage.
There'll be a linkage which connects the two wipers together... that may have come loose or gotten broken otherwise.