0
Not an overly hard job, but you will need some basic hand tools, a good shop manual, and a clean area to work. A few tips... Don't let ANY dirt get in the holes where the injectors meet the manifold. Blow off any debris with some shop air or cleaner first. Make sure nothing falls in the holes while the injectors are removed. Use a light coat of silicone on the injector seals to make them easier seating in the manifold and fuel pipe when reinstalling. CLEAN is everything. If you need online service help, see the related links.
What else can I help you with?
How do you remove intake manifold on a 1990 Acura Integra?
The intake manifold on a 1990 Acura Integra connects to the head of the engine. Loosen all of the nuts from the manifold to the head, disconnect the throttle body, vacuum lines, fuel injectors and coolant lines then pull the manifold from the head.
Wiper intermittent relay 1991 Acura Integra?
wiper intermittent relay 1990 acura integra
Will a 1991 Acura Integra alternator fit on a 1990 Acura Integra LS?
Yes, It will fit a 90-93
How do you change the alternator in a 1995 Acura Integra?
how do you replace an alternator on a 1990 integra
What obd is a 1990 Acura Integra?
OBD 0
Does a 1990 Acura Integra have anti lock breaks?
Yes that year integra is equiped with ABS
Does a 1990 Acura Integra have anti-lock breaks?
Yes that year integra is equiped with ABS
Your 1990 Acura Integra will not start?
Check your negative cable to the battery.
Is the radiator support on a 1990 Acura Integra bolted on or welded on?
welded on
How much to a gallon does a 1990 acura integra hold?
Up to 24
What size gas tank does your 1990 Acura Integra have?
13.2 Gal.
Will a 1994 Acura Integra gsr manual transmission fit a 1990 Acura Integra ls?
No, 90-93 was cable operated, 94-up was hydraulic.
