Turn the key on and do not start. Push the gas pedal all the way to the floor 3 times being sure to let all the way off of it each time. Then turn key off then start engine.
If light stays on, repeat steps again.
Change engine oil, or check oil indicator?
usually next to the change oil indicator there will b a small hole use a paper clip or something similar to push in and reset
How do I reset the service engine light on a 2003 Chevy Trailblazer?
No there is not. Chevy did not use them on there trucks.
There is not a reset switch.
Check engine light is reset with a scan tool.Oil change due is reset by pressing "step" until "0 miles to service" is displayed. Then press and hold "reset" until it resets.
To reset the oil change notification on a 2003 Honda ATV, first turn on the ignition without starting the engine. Then, press and hold the "reset" button (or the "mode" button, depending on the model) until the oil change indicator blinks and then disappears. This process typically takes a few seconds. Finally, turn off the ignition to complete the reset.
turn the key to on possition pump the gass pedal all the way to the floor 5 times then turn the key to the off possition then it shoud reset. Undo the battery for 10 minutes and it will clear the indicator.
Do not start, but turn the key on and push the gas pedal all the way to the floor and let off of it 3 times, then turn key off. Then start the truck. If it don't go off then repeat steps again.
what causes the light to come on
Listed in detail in your owner's manual. Don't have one then you need to get one.
Press and hold the odometer rest button while at the same time turning the ignition on without starting the engine. After 5 seconds it will reset.