Change engine oil, or check oil indicator?
When the red sleeve shows in the window, the air filter is clogged. the indicator is connected to the engine side of the air filter, and the increase in vaccum causes the indicator to trip. It can be reset by pushing in the button on the end.
Clear all PCM codes.
Turn key to on position with out starting. Press the select/reset knob until the "engine oil life indicator" is displayed. Hold down the knob for at least 10 seconds. The "engine oil life indicator" will blink. Hold down the select/reset knob for at least 5 seconds. The "engine oil life indicator" will be reset to 100%.
To reset the service indicator on a VW Polo, turn on the ignition without starting the engine. Press the gas pedal three times within 10 seconds. After that, turn off the ignition and start the engine to confirm that the service indicator has been reset. If it doesn’t reset, repeat the procedure.
A person can reset the service engine light in a 1998 Tahoe by disconnecting the battery cables for 1 minute. After the battery cables are reconnected, the light should turn itself off.
To reset the oil indicator on a Seat Ibiza, first turn on the ignition without starting the engine. Then, press the gas pedal fully three times within five seconds. After that, turn off the ignition and start the engine to confirm that the oil indicator has been reset. If it doesn't reset, repeat the process.
Turn key on, do not start,Then push the gas pedal all the way to the floor 3 times then turn key off. and then start engine. Light will go out in a few seconds.
The service indicator light, in your Mercedes ML 270, can be reset by holding in the engine oil life button. The engine oil life will go to 100 percent. The service indicator light should go off.
To reset the service indicator on a 2008 Mercedes CLK 350, turn the ignition key to the "On" position without starting the engine. Press the gas pedal fully three times within five seconds. After this, turn the ignition off and then start the engine to confirm that the service indicator has been reset. If the indicator remains, repeat the process.
To reset the oil life indicator on a Camry XLE after changing the oil, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine to verify that the oil life indicator has reset to 100%.
To reset the service indicator on a 2001 Audi A3, turn the ignition on without starting the engine. Press the gas pedal fully three times within five seconds. After doing this, turn off the ignition and then start the engine to ensure the service indicator has been reset. If the light remains on, repeat the process.
You will need a reset tool to reset the service indicator on the Mercedes e240. You will reset the indicator by using the buttons on the dash.