To reset the service indicator on a 2004 Viano van, first turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, turn off the ignition, then start the engine to check if the service indicator has been reset. If it hasn't reset, repeat the process.
how do you reset the service indicator on a 07 vauxhall combo van
To reset the service indicator on a 2009 Sprinter van, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After that, turn the ignition off and then back on to verify that the service indicator has been reset. If necessary, repeat the process to ensure it has been cleared.
To reset the service indicator on a 2005 Vito van, first, turn the ignition key to the "on" position without starting the engine. Press the gas pedal three times within 10 seconds. Next, turn the ignition off and then start the engine to check if the service indicator has been reset. If the light remains on, repeat the process to ensure the reset was successful.
use trip computer switch located on wiper lever when service indicator comes up press in button on side of lever
That is illegal
To reset the service indicator light on a 2008 Renault Mascott van, first, turn the ignition key to the "ON" position without starting the engine. Then, press the accelerator pedal three times within 10 seconds. Turn the ignition off, and the service light should be reset when you turn the ignition back on. If the light remains on, you may need to repeat the process or consult the vehicle's manual for specific instructions.
The Mercedes Benz Viano is a multi purpose vehicle based on the commercial panel van, also made by Mercedes. It is also sold as a V class vehicle in some countries.
Resetting the service light on a Citroen Nemo van is easily done. This service light will be set by a mechanic after the issue has been resolved.
turn key to 2nd setting then press km/mi twice-turn key back to 0-hold km/mi down and turn key back to 2nd setting after 10 sec or so it will reset . hope this helps
Hold down the mileage trip button located on the speedometer BEFORE you turn ignition key on. Turn key and continue to hold trip until service indicator resets.
be more specific on vehicle type
To reset the service mileage on a Sprinter van, first turn the ignition to the "ON" position without starting the engine. Then, navigate to the trip computer using the steering wheel buttons until you find the service menu. Press and hold the "OK" button while highlighting the reset option, and confirm the reset when prompted. Finally, turn off the ignition to complete the process.