how do you reset the service indicator on a 07 vauxhall combo van
To reset the service indicator on a 2004 Viano van, first turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, turn off the ignition, then start the engine to check if the service indicator has been reset. If it hasn't reset, repeat the process.
To reset the service indicator on a 2009 Sprinter van, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After that, turn the ignition off and then back on to verify that the service indicator has been reset. If necessary, repeat the process to ensure it has been cleared.
a special reset tool is needed
use trip computer switch located on wiper lever when service indicator comes up press in button on side of lever
That is illegal
To reset the service indicator light on a 2008 Renault Mascott van, first, turn the ignition key to the "ON" position without starting the engine. Then, press the accelerator pedal three times within 10 seconds. Turn the ignition off, and the service light should be reset when you turn the ignition back on. If the light remains on, you may need to repeat the process or consult the vehicle's manual for specific instructions.
How do you change alyernator on vauxhall combo van 2007.
Resetting the service light on a Citroen Nemo van is easily done. This service light will be set by a mechanic after the issue has been resolved.
turn key to 2nd setting then press km/mi twice-turn key back to 0-hold km/mi down and turn key back to 2nd setting after 10 sec or so it will reset . hope this helps
be more specific on vehicle type
Hold down the mileage trip button located on the speedometer BEFORE you turn ignition key on. Turn key and continue to hold trip until service indicator resets.
To replace the indicator bulb in a Vauxhall Combo van, first ensure the vehicle is turned off and the keys are removed. Open the relevant access panel or remove the headlight assembly, depending on the model year. Gently twist the bulb holder counterclockwise to remove it, replace the old bulb with a new one, and then secure it back in place by twisting it clockwise. Finally, test the indicator to ensure it’s functioning correctly before reassembling any panels.