0
Lately I have not gotten it to work, but in the past I would turn engin off, press the brake to the floor, and press the gas petal down to the floor 3 times. Repeat this procedure until you succeed. After reading the answer to the same question on the 2000 model, I remembered that this is the correct answer for the 2002 model also. NEW ANSWER: Turn key on, DO NOT START. Push the gas pedal all the way to the floor 3 times. Then turn key off and then start engine. Light should flash and then go out. Just be sure that you let all the way off of the gas pedal each time. NEUTZ.
What else can I help you with?
How do you reset change oil in 2011 silverado?
To reset the oil change light in a 2011 Chevrolet Silverado, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal fully three times within five seconds. After doing this, the oil change light should reset. Turn the ignition off and then start the engine to ensure the light is no longer illuminated.
How do you reset the computer on 2015 Chevy Silverado after changing the oil?
To reset the oil change light on a 2015 Chevy Silverado after changing the oil, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times fully within five seconds. Then, turn off the ignition. When you start the engine again, the oil change light should be reset.
How do you reset the check engine light on a 2006 Chevy Silverado 1500?
That REQUIRES an ENGINE SCANNER to do that.
Will engine light on 2005 silverado reset after problem corrected?
when you disconnect your battery and reconnect it will reset cumputer
How do you reset service engine soon light on 2001 Chevrolet silverado?
That requires an OBDII engine scanner.
How do you reset oil change light on 1999 Chevy silverado 1500?
key on engine off press accelerator pedal to the floor five times very rapidly should reset
How do you reset the service engine soon light on a 2001 silverado?
engine code reader go to autozone its free tgere
How do you reset the change oil light in a 2001 Chevy Silverado?
Turn the ignition set to on without starting the engine. Press the gas pedal three times in quick succession and watch for battery light to flash three times, when it does, it is reset.
How do you reset the change engine oil light on your 2000 Silverado?
Turn the ignition key to the run position and pump the accelerator 3 times within 5 seconds.
Reset check engine light 05 silverado?
The check engine light comes on to notify the driver that there is an issue. To reset the light, it is best to take care of the issue, or use a scanner that will clear any possible codes.
How do you reset the check engine light after an oil change on a 2004 Pontiac Vibe?
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
How do you reset check engine light on Chevrolet 1994 silverado?
unplug your battery for 15 minutes and it will go off
