answersLogoWhite

0

="h2headingh2"style="color:rgb(0,0,0);"name="answer">I've heard a trick for some other cars that might work for your problem, it's worth a try right?

Turn your key to on position (not start).

Immediately depress the gas pedal fully (floor it) three times fast.

Watch the light, if you do it properly after a few seconds it will flash a few times and go out. Sometimes you have to do it a few times to get the timing right.

NEW ANSWER: That is almost right. But here's what you do. Turn key on do not start then push the gas pedal all the way to the floor 3 times being sure to let all the way off of it each time then turn the key OFF and then start the engine. You have about 5 seconds to do all of this.

If you were successful the light will flash 5 times.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you reset the computer on 2015 Chevy Silverado after changing the oil?

To reset the oil change light on a 2015 Chevy Silverado after changing the oil, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times fully within five seconds. Then, turn off the ignition. When you start the engine again, the oil change light should be reset.


How do you reset the check engine light on a 2006 Chevy Silverado 1500?

That REQUIRES an ENGINE SCANNER to do that.


Will engine light on 2005 silverado reset after problem corrected?

when you disconnect your battery and reconnect it will reset cumputer


How do you reset service engine soon light on 2001 Chevrolet silverado?

That requires an OBDII engine scanner.


How do you reset oil change light on 1999 Chevy silverado 1500?

key on engine off press accelerator pedal to the floor five times very rapidly should reset


How do you reset the service engine soon light on a 2001 silverado?

engine code reader go to autozone its free tgere


How do you reset the change oil light in a 2001 Chevy Silverado?

Turn the ignition set to on without starting the engine. Press the gas pedal three times in quick succession and watch for battery light to flash three times, when it does, it is reset.


How do you reset the change engine oil light on your 2000 Silverado?

Turn the ignition key to the run position and pump the accelerator 3 times within 5 seconds.


Reset check engine light 05 silverado?

The check engine light comes on to notify the driver that there is an issue. To reset the light, it is best to take care of the issue, or use a scanner that will clear any possible codes.


How do you reset the check engine light after an oil change on a 2004 Pontiac Vibe?

The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.


How do you reset check engine light after an oil change on a Toyota?

The check engine light has nothing to due with an oil change.


How do you reset the check engine light for oil change on a 2009 Camry?

The check engine light does not come on for an oil change.