I have a 2008 G5 and reset the oil life message this way.
First look in your manual - it will tell you how to reset the message, otherwise do it this way.
1) Turn on your ignition key - do not start engine.
2) Go to engine oil life message.
3) Press and hold reset button, then press menu change button. Release both buttons.
4) A message will be displayed "Reset oil message".
5) Press the reset button. A message "acknowledge" is shown.
6) Press the reset button again. Oil life will be 100%.
How do you reset the 'oil change required' message on 2007 Lincoln Town Car???
how to reset change oil message on 2013 beetle
i have a 99 gtp and it resets itself after i change the oil
How do you reset the message to service engine soon on 2005 Nissan terra
press the reset button
The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL message being turned on, reset the system. Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the CHANGE OIL message, do the following: 1. Press reset stem till it Displays "OIL LIFE" on the DIC.(3 times) 2. Press and hold the reset stem. The oil life will change to 100% and a beep will sound. 3. Turn the key to LOCK. If the CHANGE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. Hope This Helps.
Read you owner's manual.
Hold the oil/trip Reset button while ignition is on (not car) for 8 seconds
To reset the oil change message on a 2011 Ford Escape, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn off the ignition and start the engine to verify that the oil change message has been reset. If the message is still displayed, repeat the process.
Driver side fuse box there is a switch you push to reset.
Read the Manual
To reset the oil change message on a 2006 Cadillac Escalade, first turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the oil change message should disappear, indicating that the reset was successful. Make sure to turn off the ignition and then start the engine to confirm the reset.