To reset the electronic throttle control on a Dodge Caliber, first, turn off the ignition and disconnect the negative battery terminal for about 10-15 minutes. Reconnect the battery and turn the ignition to the "On" position without starting the engine, allowing the throttle body to recalibrate. Finally, start the engine and let it idle for a few minutes to ensure the system recognizes the reset. If issues persist, consider checking for trouble codes or consulting a professional.
The electronic throttle control actuator on a 2010 Dodge Caliber is integrated within the throttle body assembly, which is located on the intake manifold. To access it, you'll need to remove the air intake duct and any associated components to reach the throttle body. The actuator is responsible for controlling the throttle plate position based on signals from the engine control module. Ensure to disconnect the battery before servicing to avoid electrical issues.
The 5.7L Hemi and 5.9L diesel do have electronic throttle.
A failure in the electronic throttle control system. You need to have the system checked for codes.
Yes
in the 2008 dodge caliber it seems like you cannot. My brother did in fact disconnect the battery...quess what, it worked. after connecting it back, the system reset and off they went.
The throttle body is controlled by the engine computer, which is located on the firewall.
The computer has detected a malfunction with the electronic throttle system and set a trouble code.
On a 2007 Dodge Caliber, the Electronic Throttle Control (ETC) is integrated within the throttle body assembly, which is located on the intake manifold. To access it, you typically need to remove the air intake duct and possibly other components for better visibility and reach. The ETC is responsible for regulating the engine's air intake based on accelerator pedal input.
It comes on when the computer detects a malfunction and sets a code.It comes on when the computer detects a malfunction and sets a code.
In the 2008 Dodge Avenger, the electronic throttle control (ETC) is typically located on the throttle body, which is situated on the intake manifold of the engine. The throttle body is connected to the air intake system and is responsible for regulating airflow into the engine based on signals from the accelerator pedal position sensor. To access the ETC, you may need to remove the air intake duct and other components that obstruct the throttle body.
The light comes on when the computer has detected a malfunction and sets a code.
To repair or replace the throttle actuator control throttle body on a Dodge Caliber, you first need to diagnose the issue, often using an OBD-II scanner to check for trouble codes. If replacement is necessary, you can purchase a new or refurbished throttle body from an auto parts store or online. Installation typically involves disconnecting the battery, removing the air intake and old throttle body, then installing the new part and reconnecting everything. If you're unsure, consider consulting a professional mechanic for assistance.