0
To reset the brake pad sensor light on a Chevy Express van, first ensure that the brake pads have been replaced or are in good condition. Then, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, which should reset the light. Finally, turn the ignition off and then back on to confirm that the sensor light has been cleared.
What else can I help you with?
Where is the brake light sensor on 1974 Chevy c10 truck?
It does not have a sensor, It has a switch and it is mounted just above the brake pedal.
Where is the light sensor on a 2002 Chevy Tracker?
my brake light s don't work but the fuses are good
What does an ABS light mean on a 1994 Chevy beretta?
anti lock brake system light might mean a bad brake sensor must be replaced
1997 Chevy Silverado brake switch removal?
be more specific the break sensor?parking break light?
How do you know if the rear brake lights do not work on a 98 Chevy Venture because of the brake sensor or the bulb?
On a 2000 I switched the backup light (which worked) into the brake light hole. It did not work. But brake light bulb in backup light hole worked. So that means it is NOT the bulb. Has to be sensor. I had problems with the taillights on a '99. Problem was the connector to the light assembly. I replaced the wiring harness connector using a junkyard replacement.
Why on a 98 Chevy express do the brake lights go out when headlights are and brake pressed but window brake light works if headlights are off they work?
Check the bulbs one of the 2 filaments may be burned out
What is wrong when you rear abs and brake light sensor stays on in your 1995 rodeo?
you have a brake problem and need to have it repaired before you can reset the light sensor you have a brake problem and need to have it repaired before you can reset the light sensor
Third brake light on a 96 Chevy beretta?
how to change third or center brake light on Chevy beretta 95
How do you change a brake light on a 1998 Chevy Camaro?
You will need to remove the 1998 Chevy Camaro brake light wiring harness. Remove the brake light retaining screws. Reverse the process to install the new brake light.
How do you install a brake light switch for a 1992 Chevy lumina?
It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.
How do you change brake light switch on 1999 Chevy cavalier?
Changing the brake light relay switch on your 1999 Chevy Cavalier is quite easy. The brake light switch simply plugs in and out.
Brake light and cruise don't work on Chevy Avalanche?
Check the brake light switch on the brake pedal
