0
To reset the change engine oil light in a 2003 Oldsmobile Silhouette, first turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within five seconds. After this, turn the ignition off, and then start the vehicle to ensure the light has reset. If the light remains on, repeat the process.
What else can I help you with?
Oldsmobile silhouette transmission slips?
engine light is on 1997 olds sillouette tranny slpis code
How do you reset the check engine light on a 1999 Oldsmobile silhouette?
To reset the check engine light on a 1999 Oldsmobile Silhouette, you can disconnect the negative battery terminal for about 15 minutes. This will clear the vehicle’s computer memory, including the check engine light. Alternatively, you can use an OBD-II scanner to erase the trouble codes that triggered the light. However, it's essential to address any underlying issues before resetting the light to avoid recurring problems.
How do you reset the oil change light on 2004 Oldsmobile Silhouette?
Push the odometer trip reset till you get to "oil" then press and hold down till it reads "100"
Why does the check engine light stay on 2001 silhouette after an oil change and egr valve was replaced?
First, the oil change has nothing to do with the check engine light. The EGR may have not been the problem. You need to have the codes read and diagnose from there.
2001 Oldsmobile Silhouette cooling fan won't turn off?
That indicates the engine temp is running to low: the computer should give a check engine light and often the temp gauge will not work either. you need to replace the thermostat
How do you reset 'change engine oil' light in a 2000 Silhouette?
with the ignition key on but engine off , fully push and release the gas pedal slowly three times with in five seconds
How do you reset the oil change light on a silhouette?
To reset the oil change light on a Chevrolet or Pontiac Silhouette, turn the ignition key to the "On" position without starting the engine. Press the accelerator pedal three times within five seconds. Once completed, turn the ignition off and then start the vehicle to ensure the light has been reset. If the light remains on, repeat the process.
How do you take the tail light off a 1996 Oldsmobile silhouette van?
Open the tailgate, you will find the screws for removal of the taillight assembly.
How do you reset the airbag light on a 1999 Oldsmobile silhouette?
To reset the airbag light on a 1999 Oldsmobile Silhouette, you can try disconnecting the vehicle's battery for about 10-15 minutes to reset the system. After reconnecting the battery, turn the ignition on without starting the engine to allow the airbag system to perform a self-check. If the light remains on, it may indicate a deeper issue with the airbag system that requires professional diagnostic equipment to address. Always consult the vehicle's manual or a professional mechanic for further assistance.
Service engine soon light cutlass supreme?
The service engine soon light on an Oldsmobile Cutlass Supreme notifies the driver that it is time to change the oil. It is trigger around the 3,000 mile mark at regular intervals.
How do you reset the change oil light in a 2000 Oldsmobile Intrigue?
To reset the change oil light in a 2000 Oldsmobile Intrigue, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Then, turn the ignition off and back to the "ON" position to check if the light has reset. If the light is off, the reset is successful.
How do you reset the service engine soon light on 2003 envoy?
You can try unhooking the battery for 5 min. You may also get it scanned find out what the problem is, get the codes cleared, problem fixed & should be o/k why does 1994 Oldsmobile silhouette keep dying
