with the ignition key on but engine off , fully push and release the gas pedal slowly three times with in five seconds
To reset the oil change light on a Chevrolet or Pontiac Silhouette, turn the ignition key to the "On" position without starting the engine. Press the accelerator pedal three times within five seconds. Once completed, turn the ignition off and then start the vehicle to ensure the light has been reset. If the light remains on, repeat the process.
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
The check engine light has nothing to due with an oil change.
The check engine light does not come on for an oil change.
The service engine soon is the same as a check engine light. It has nothing to do with an oil change.
The check engine light does not come on when an oil change is due. The check engine light is for an emissions related failure. It is reset with a scan tool after the fault is repaired.
Push the odometer trip reset till you get to "oil" then press and hold down till it reads "100"
how do you reset the check engine light on a 2005 Toyota tundra
change the oil
Need to reset computer...
The change oil light is reset by turning the key on, engine off, and pressing the gas pedal three times.The check engine light can only be reset with a scan tool. The cause of the fault needs repaired or the light will return.
To change a check engine light the dashboard must be removed this is best done by a mechanic. To reset a engine light unplug the cars battery for half a hour.