on your 2001 Tahoe the change oil light is tripped by a sensor in the main frame computer. my suggestion is to take it to your nearest dealership and have then reset it . this should solve your problem
Turn ignition on but don't start, press gas pedal to floor three times. This should do it.
The 2001 Chevrolet Tahoe has a V8 engine.
Turn key on ( do not start ) then push the gas pedal all the way down 3 times and then turn key off and then start the engine.
Turn key on ( do not start ) then push the gas pedal all the way down 3 times and then turn key off and then start the engine.
The 2001 Chevrolet Tahoe has a 4.8 L base engine size.
The 2001 Chevrolet Tahoe's engine produces 275 hp @ 5200 rpm.
The 2001 Chevrolet Tahoe's engine produces 290 ft-lbs. @ 4000 rpm.
Key on engine off press the gas pedal to the floor 3 times within 5 seconds Itll be reset when it stops flashing
Turn key on, do not start,Then push the gas pedal all the way to the floor 3 times then turn key off. and then start engine. Light will go out in a few seconds.
Yes
Chevrolet does not use inertia or reset switches.
The engine rear main seal can only be replaced with the engine or transmission out of the vehicle.
With engine off. Turn key to on. Press accelerator fully three times. This should reset light.