0
Listed in your owner's manual. However, the reset pushbutton performs two functions. The first function is to find or select the change oil light. The second function is to reset the change oil light. So, when the manual says press the reset pushbutton, it means to press and release, press and release, press and release, ... and so on.... until the change oil light is selected. The change oil light is selected when it begins to flash on and off. Once the change oil light is selected by it flashing on and off, press and hold the reset pushbutton again in solidly to actually reset the light. Hold the reset pushbutton in until the chimes sound. This confirms the change oil light is reset and the light should go out.
*Remember* before you even begin resetting using the reset button, the car must be in neutral or park or it will not work.
AnswerIf you do not have an oil change reset button located on the drivers side inside the fuse panel. Turn ignition key to the on position (with engine off). Depress accelerator pedal 3 times. Oil change light should blink and you should here a beep, light will go out. Turn ignition key off.
What else can I help you with?
How do you reset the change oil light in 2004 alero?
how do you reset change the oil light in a 2004 alero?
How do you reset the service engine light on a 1999 Oldsmobile Alero?
turn off engine, and start again
What to do when the service engine soon light comes on - 2002 Oldsmobile Alero The reset button is for oil change tire pressure low Thanks?
Have vehicle scanned to determine the problem
Reset check engine light in 01 Oldsmobile alero?
get a code scanner, or borrow one from a parts store, plug it in and clear codes
How do you reset the pass lock on 1999 Oldsmobile alero?
Turn the ignition key on for 10 minutes and it will reset.
How do you reset the change oil light on a 1999 Oldsmobile Alero?
turn switch to on position (all the dash lights on but engine off) wait for all lights to go out then press accelerator pedal three times
Where is the fuel pump reset button on 2001 Oldsmobile alero?
GM vehicles do not use inertia/reset buttons
How do you reset the low tire pressure light on a 2001 Oldsmobile Alero?
Open up the drivers side door and you will see a cover pannel on the dash side. Pull the open and press the reset light until the light flashes. You must have the car ON.
Where is the fuel pump reset switch on a Oldsmobile Alero?
There isn't one. Ford is mainly the only ones who have a reset switch.
How do you reset the change oil light in a 2000 Oldsmobile Intrigue?
To reset the change oil light in a 2000 Oldsmobile Intrigue, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Then, turn the ignition off and back to the "ON" position to check if the light has reset. If the light is off, the reset is successful.
How do you reset the low tire pressure light on a 1999 Oldsmobile Alero?
To reset the low tire pressure light on a 1999 Oldsmobile Alero, you will typically need to locate the reset button, which is usually located under the dashboard or near the steering wheel. With the ignition turned on but the engine off, press and hold the reset button until the light blinks or turns off. This should recalibrate the system and reset the low tire pressure light. If this method does not work, consult the vehicle's manual for specific instructions or consider visiting a mechanic for further assistance.
What does the low coolant warning display light look like on a 2001 alero?
I have a 2002 alero how do you reset, the coolant light is always on. Thanks, Alero owner
