This works I swear Ive done it!! Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the ignition key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on, repeat the procedure. To reset the OIL LIFE indictor if equipped with a Trip Computer: Press the trip MODE button until the light appears next to OIL LIFE. Press and hold the trip RESET button until the oil life percentage changes to be 99 percent.
try disconnecting battery for 15 minutes
u have to push the reset button off in on until u get to the light that u want to turn off and then hold the reset button in until the light goes off. Pop the fuse panel cover off the driver side fuse box, you have to open the door to get to it. With the key in the ignition and in the "ON" position, push the button in the fuse box that says "reset". The Tire Pressure or Oil Change light will start to blink, let go and push it one more time. The car should ding a few times, then the light will go off.
No.
Unscrew it from the rear of the light. You may have to take it off to do this.
You can find that info in your drivers manual.
there is no "reset" new pad and sensors is the fix if you have had this done they botched the job
how do i reset the check engine light on a 1999 acura 3.2tl
Resetting the maintenance light on a 1999 Toyota Tacoma is very easy to do. To reset the light, take the battery cables off for up to one minute to reset the light.
How to reset maintenace light on 1999 acura t l 3.2
how do I reset my service engine light on my 1999 ford f150
There is nothing to "reset" for the 1999 VW Beetle.
where is the computer location on 10/1999 Pontica grand prix(srs)