The factory alarm is reset by unlocking the doors with a key or remote.
The factory alarm is reset with the remote or by unlocking the door with the key.
To reset an alarm on a 2001 Dodge Ram 1500, disconnect the battery cable for 10 minutes. Users can also disable the alarm by inserting the key into the door.
disconnect the battery to shut off/reset
You can reset the Dodge Viper alarm system by removing the alarm system fuse. The location of the fuse can be found on the inside cover of the fuse box.
Un-hook the barrery Un-hook the battery
I used the remote to lock/unlock the doors and it reset the anti-theft on a 1997 Dodge Intrepid.
The 2001 Dodge Neon factory alarm system does not have a reset switch. Instead, you need to insert the key into the driver's door and turn to unlock the door. Next, turn the key clockwise to initiate the alarm and turn counterclockwise to stop the alarm. Once you stop the alarm, it will reset itself.
To reset the car alarm in a 2005 Dodge truck, start by unlocking the driver's side door with the key or the remote key fob. If the alarm goes off, insert the key into the ignition and turn it to the "ON" position for a few seconds, then back to "OFF." This should reset the alarm system. If the alarm remains activated, disconnecting and reconnecting the battery may also help reset it.
You have a new vehicle and I am sure it came with an owner's manual. Read it!
disconnect and reconnect the battery
Turn the key in the drivers side door lock to the locked and then unlocked position. This should clear the alarm and reset it.