Turn the key to the ON position where all the dash lights come on.
Within five seconds depress and release the gas pedal fully 3 x.
The oil light should blink then stay off.
Start truck and it should be off.
www.trailvoy.com All the answers for your Trailblazer!
to reset your oil life turn your car to the on position dont started and tap the gas like 3 or 4 time then shut it off the start it and when you do all this you cant be on the brake or the clutch if you have one
Turn the key on then push the gas pedal to the floor 3 times. Then turn key off and then start engine.
Mine won't answer either!! help!
You have to reset the oil life in the computer to get it to go out.
Turn key to ON position and then pump the gas pedal and it will reset oil life meter.
To reset the oil life on a 2005 GMC Denali, first turn the ignition to the "ON" position without starting the engine. Then, press the accelerator pedal all the way to the floor three times within five seconds. After doing this, the oil life percentage should reset to 100%. Finally, turn the ignition off and then restart the engine to confirm the reset.
Hold the mode button until display says someting like Oil life xx% press reset to renew. Hold reset button in until it says oil life 100%
Turn on the key but don't start the van. Push the accelerator to the floor and release 3 times. It will now reset.
push in the info button on the dash a series of times until fuel life comes up and it will say reset fuel life then hold the button until it says reset it will then display fuel life 100 persent
Turn ignition to run engine off. Display OIL LIFE RESET in the Driver Information Center (DIC). Press and hold the ENTER button for at least one second. An ACKNOWLEDGED' display message will appear for three second or until the next button is pressed. This will tell you the system has been reset. Turn the key to OFF. If the "CHANGE ENGINE OIL" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
You can reset the oil light by scrolling to the oil life display. Once on the display, hold the scroll button in until the oil life goes to 100 percent
When you see the Change Oil light on, push and hold the button just like you would to reset the trip counter