Try this, turn key on ( not start ) press gas pedal down three times ( not too fast ) and turn off key.
Start motor and the light should be off.
To reset the oil life indicator in a 2004 Acura TL, turn the ignition to the "ON" position without starting the engine. Press the gas pedal fully to the floor three times within five seconds. After doing this, the oil life indicator should reset to 100%. Turn the ignition off, and then start the engine to confirm the reset was successful.
To reset the oil life indicator on a Camry XLE after changing the oil, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine to verify that the oil life indicator has reset to 100%.
To reset the oil life indicator on a 2007 Cadillac SRX, first turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal slowly three times within five seconds. Then, turn the ignition off and start the engine to ensure the oil life indicator has been reset.
Turn key to on position with out starting. Press the select/reset knob until the "engine oil life indicator" is displayed. Hold down the knob for at least 10 seconds. The "engine oil life indicator" will blink. Hold down the select/reset knob for at least 5 seconds. The "engine oil life indicator" will be reset to 100%.
To reset the oil life indicator on a Ford Focus after an oil change, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine to ensure the oil life indicator has been reset. If done correctly, the indicator should display 100%.
To reset the oil life on a Mercury Montego, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal three times within five seconds. This should reset the oil life indicator on the dashboard. If the indicator doesn't reset, repeat the process to ensure it was done correctly.
The service indicator light, in your Mercedes ML 270, can be reset by holding in the engine oil life button. The engine oil life will go to 100 percent. The service indicator light should go off.
A = Change oil1= Rotate tires To reset this turn the ignition switch to the ON position. 2. Press the Select/Reset knob until the engine oil life indicator is displayed. 3. Press the Select/Reset knob for about 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink. 4. Press the Select/Reset knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life indicator will reset to "100."
A = Change oil1= Rotate tires To reset this turn the ignition switch to the ON position. 2. Press the Select/Reset knob until the engine oil life indicator is displayed. 3. Press the Select/Reset knob for about 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink. 4. Press the Select/Reset knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life indicator will reset to "100."
Turn on the ignition but do not start vehicle. Your engine and oil light will come on. Press on the accelerator three times and hold it down until oil light disappears. You have reset the oil life indicator.
The service indicator, on a Mercedes E 200, can be reset by scrolling to the oil life screen. From the screen hold down the scroll button until the percentage goes to 100 percent.
press info botton until you come upon "oil life" then press and hold the reset button for about 5 seconds