If an 02 sensor has failed, it can only be replaced.
See "Related Questions" below for more
The fuel pump reset button on a 2003 Ford Windstar is on the driver's left foot area. It is next to the hood release.
exactly where is of 02 oxigen sensor the ford windstar 2003
The P0133 code refers to a problem with the oxygen sensor circuit, specifically the upstream oxygen sensor (O2 sensor) located before the catalytic converter. On a 2003 Ford Windstar, this sensor is typically found on the exhaust manifold or the front part of the exhaust system, near the engine. To access it, you may need to lift the vehicle and remove any protective covers or components obstructing the sensor. Always ensure the engine is cool before attempting to work on exhaust components.
Push the reset button just to the right of the trip odometer
remove negative and positive cables from battery, touch cables together for 30 seconds and then reconnect.....will be reset.
How do you unplug an oxygen sensor on a 2003 Chevy Cavalier
There is no speed sensor reset. IT must be repalced if failed.
For a 2003 Ford Windstar : The fuel pump shut off switch ( inertia switch ) is located ( behind the service panel cover on the passenger side of the cargo area )
unplug conn. use a 7/8 wrench to remove o2 sensor Your windstar has at least 3 oxygen sensors. Make sure you are changing the right one. There is one on each manifold and one on the catylitic converter. You need a special tool called an o2 wrench to properly remove one.
On a 2003 Ford Windstar, the alarm reset is typically found in the vehicle's fuse box or may be integrated into the keyless entry system. You can also try disconnecting the battery for a few minutes to reset the alarm system. If the alarm continues to malfunction, checking the owner's manual for specific instructions or consulting a professional may be necessary.
It is the oxygen sensor.
The bank 1 oxygen sensor on a 2003 Ford Taurus is located on the motor. It is on the top, back part near the firewall.