To reset the traction control light on a 2001 Oldsmobile Intrigue, first, ensure that the vehicle is in good working condition, as the light may indicate a system issue. You can start by turning off the ignition, then disconnecting the battery for about 15 minutes to reset the system. Reconnect the battery and start the car; if the light persists, it may indicate an underlying problem that needs to be diagnosed with an OBD-II scanner. Always consult the vehicle’s manual for specific instructions or seek professional assistance if needed.
Usually caused by a bad ABS sensor or wiring harness to the sensor. Both are serviced with a hub-bearing assembly.
When the traction light is on you have the traction control turned on in your vehicle and traction control is activated. Traction control is applying brakes to a wheel that losing traction.
its the traction control light. more specifically its the traction control malfunction light
To turn on the traction control in a 2003 Oldsmobile Alero, locate the traction control button, which is typically found on the center console or dashboard. Press the button to activate the system; an indicator light on the dashboard should illuminate to confirm that traction control is engaged. If the light is off, the system is deactivated. Always refer to your owner’s manual for specific instructions related to your vehicle configuration.
what about it? if its on, your traction control is on & working. if its not, then its not!!
on. if you cut traction control off the vehicle runs fine
What does 'service engine soon' light mean on a 1998 olds intrigue?
your traction control light came on because either you turned off your traction control or your car needs brake fluid
With a scan tool.
The computer has detected a malfunction and set a code.
To let the drive know that the traction control is on.
How to reset the service traction control light on a 2007 Chevy Sub?