0
What else can I help you with?
Is there a fuel reset button on the 2003 GMC Yukon?
The answer is no.
How do you turn off oil change light that remained on after an oil change on a 2003 Yukon?
Read your manual for accuracy, it's n there, but, If I'm not mistaken it's turn your key to ignition and pump the accelorator about three times, that should reset it.
How do you reset the check engine light on a 2003 Yukon XL?
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
How do you reset airbag light on 2003 gmc Yukon?
Take this truck to a professional for repair. Working on the SRS is hazardous and is not a DIY repair. Something is wrong with the SRS or the light would not be on.
When did Yukon territory change its name to Yukon?
On April 1, 2003.
Reset Oil Life in 2003 Yukon?
if you have the steering wheel controls, that arrow on the lower right side will reset it.
How do you reset the change engine oil light in your 2003 Yukon XL?
turn your switch forward but dont crank and press the gas about 4 times and hold for 5 seconds let go turn switch back then start car
What about a 2003 gallant does it have a reset button after you change the oil for service engine light?
There is no reset button for the check engine light. You can have Mitz. do it for $$$ or you can remove the negative battery line for a few seconds and replace. That will reset the check engin light.
How do you reset the change oil light on a 2003 Pontiac Grand Am?
AnswerTo reset the change oil soon light turn the key to on (not run) and step on the gas to the floor 3 times fast.ACCORDING TO THE 2003 OWNERS MANUAL1. With Key on, (a short time after turning off the engine), press reset button located on drivers side instrument panel fuse block . Button is located at top.2. When the change oil light starts to flash, press and hold the reset button again3. The reset is complete when you hear the chimes and the CHANGE OIL light goes out
Mercedes C 320 2003 How do you reset the oil light after a oil change?
no you wait till you it changed
How do you reset the change engine oil light in a 2003 Oldsmobile silhouette?
To reset the change engine oil light in a 2003 Oldsmobile Silhouette, first turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within five seconds. After this, turn the ignition off, and then start the vehicle to ensure the light has reset. If the light remains on, repeat the process.
How to reset service light indicator on 2003 grand Cherokee?
Check engine light is reset with a scan tool.Oil change due is reset by pressing "step" until "0 miles to service" is displayed. Then press and hold "reset" until it resets.
