To set the clock on a 2007 Jeep Compass, turn the ignition to the "On" position without starting the engine. Press the "Menu" button on the dashboard until you see the "Clock" option. Use the arrow buttons to adjust the hours and minutes, then press "Enter" to confirm your settings. Finally, exit the menu to save the changes.
To set the minutes on a 2007 Jeep Compass, start by turning on the ignition without starting the engine. Press the "Menu" button on the radio or dashboard display to access the settings. Use the tuning knob or buttons to navigate to the clock settings, then adjust the minutes by turning the knob or pressing the appropriate buttons. Once set, confirm the changes, and the time will be updated.
The 2005 Jeep Liberty clock can be set by holding in the volume button. With the volume button held in the clock will flash. While the clock is flashing turn the tuning knob to adjust the time.
reverse backwards for 200 yards then use the buttons on the side of the clock
With an ink pen for hrs and min
You will need both hands to set the clock in the 2007 Chrysler 300. Hold the power button in and adjusts the time with the tuning knob.
To reset the compass and clock in a 2004 Isuzu Axiom, first, turn the ignition key to the "On" position without starting the engine. For the compass, press and hold the "Compass" button until the display shows "CAL," then drive in a circle at least two times to calibrate it. To set the clock, press the "Clock" button and then use the "H" and "M" buttons to adjust the hours and minutes. Finally, press the "Clock" button again to save the settings.
To set the clock on a 2007 Honda Jazz, start by turning the ignition switch to the "On" position without starting the engine. Press and hold the "Clock" button until the display begins to blink. Use the "H" and "M" buttons to adjust the hours and minutes, respectively. Once the correct time is displayed, press the "Clock" button again to set it.
To set the clock in a 2006 Jeep Liberty, turn the ignition key to the "On" position without starting the engine. Press and hold the "Clock" button until the time display starts flashing. Use the "Tune" or "Seek" buttons to adjust the hours and minutes, then press the "Clock" button again to save the setting. Finally, turn off the ignition to complete the process.
To set the clock on a 2010 Jeep Liberty radio, first, turn the ignition key to the "On" position without starting the engine. Press the "Menu" button on the radio, then use the tuning knob to scroll to the "Clock" option. Select "Set Clock," then adjust the hours and minutes using the tuning knob, and press "OK" or "Enter" to confirm your settings. Finally, exit the menu to return to normal radio operation.
get out your owners manual and it will tell you how to do it.
Your owners manual has all the info you need on that.
August 31st, 2007.