To set the rocker arm torque specs for a 1997 Dodge Ram, first refer to the vehicle's service manual for the specific torque specifications, which typically range from 22 to 25 ft-lbs for the rocker arm bolts. Ensure the engine is at room temperature to avoid discrepancies. Use a torque wrench to tighten the bolts in the correct sequence, usually starting from the center and working outward. Always double-check the torque after completing the sequence to ensure proper tension.
The 99 milllin
The 1997 Pontiac Transport 3400 rocker arm torque specifications are 18 pounds. The rocker arm should be torqued in six pound intervals.
The torque specification for the rocker arm nut on a 1997 Chevy Cavalier is 22 foot pounds. This is the equivalent of 30 newton meters.
What is the head torque specs on a 1997 Honda CRV
According to alldata 13-15 ft lbs of torque are needed for the rocker arms. The engine does not need to be at TDC and it also does not have to be running.
What are the intake manifold torque specs on 1998 Oldsmobile bravada?"
step 1--1997-89 in lbs.------98 and later 168 in lbs,--step 2--rotate an aditional 30 degrees. for 3.1 engine,
where is torque conversion sensor on my 1997 didge intrepid?
The lifters are hydraulic type.If you are referring to the rocker arm shaft bolts, they should be torqued to 16-21 ft lbs. Hope ths helps,Tim Olsen.
torque for 97 taurus head
30
115in-ibs