answersLogoWhite

0

solid or hydraulic cam/lifters? If it is hydraulic, and the lifters are pumped up, you need to tighten the rocker nut until it *just* starts to grasp the pushrod (spin the pushrod while tightening the nut to feel it) Now, tighten the nut from the 12 o'clock position to the 4 o'clock position. Do this with each rocker with each cylinder at TDC of the compression stroke. Cams have cross duration, so the cylinder must be TDC on compressions stroke before adjusting the valves of that cylinder.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

Setting valves on 350 with hydralic lifters and roller rockers?

Chevy 350 small block engines with hydralic lifters set at 0 lash. That means start the engine and adjust the valve until it just quits clicking. Then tighten the nut approx 3/4-1 turn then set the next one.


How do you adjust rocker arms on a 307 Oldsmobile engine?

non adjustable rockers only unless you bought aftermarket roller rockers in which case they are just like Chevy rockers to adjust. buy a new set that's the only way your goin to adjust em or you could posibly file them down but your risking alot there. id recomend just buying a new oe set for your 307ci.


How do you adjust roller rockers with solid lifters on a 1978 350 chevy?

First look up the back lash for your cam, and get feelers for that and .001 bigger. Use them for a go-no go set of gages. Then, with #1 at tdc for compression, set 1,2,5,and 7 intakes and 1,3,4, and 8 exhausts so the go fits and the no go does not. Then rotate the engine one revolution (#6 tdc) and do the rest.


How do you set tappets of 4.0L Jeep Cherokee?

No adjustment required. Just torque the rockers down.No adjustment required. Just torque the rockers down.


What is the clearance for a roller rocker for 350 chev?

That depends on the cam. If it's hydraulic there would be preload, not clearance. If it's solid, you'd need the manufacturer's cam card to set the correct backlash.


Is there a LEGO roller coaster set?

There is not a Lego roller coaster in production by Lego right now, but there may have been a roller coaster set that was discontinued. After looking on multiple websites (eBay, Amazon, ect.) there is not (and never has been) a Lego roller coaster set. I do hope they make one though!!!


How do you set rockers on Mk7 tdci transit?

Doesn't the transit use a tdci with hydraulic tappets?


What is the dwell on a 350?

I set my 350 olds to 30 at 2000rpm


How do you set timing 1985 GMC 350 engine?

how do you set timing on a 1985 350 gmc truck


Which set of words should be hyphenated?

roller skates


Is the BaByliss 20-Piece Hot Roller Set better than an iron?

Yes, the Babyliss hot roller set is better for your hair,for the iron can burn or damage your hair.


What are the release dates for Bob Fosse On the Set - 1979 TV?

Bob Fosse On the Set - 1979 TV was released on: USA: 1979