0
What else can I help you with?
How do you set the timing on a 1992 Pontiac Sunbird V4?
You don't- it's controlled by the PCM. If is has a 2.5 engine you cann't adjust the timing
How do you set the clock in a 1993 Pontiac Sunbird?
Hello...I believe I can help. With the car on or off, press the SET button. The SET indicator will appear on the screen for only five seconds, so have your fingers ready. Press the SEEK button for the hour...and the SCAN button for the minutes. Good luck.
How do set the time on 1992 the Oldsmobile achieva?
How to set clock on a 1992 oldsmobile achieva
How do you set clock for 2003 Pontiac grand am?
a picture of the radio would be helpful
How do set clock in 1989 Sunbird Le?
With the radio turned off, push the set button. The scan button changes the hours and the seek button changes the minutes.
How do you set the clock on a Chevy 1992 s-10?
read the owner's manual
How do you set the clock in a '94 sunbird?
Turn the radio OFF. You will need to hit the SET button one time. Then use your long buttons on top, (SEEK, SCAN) for your hour and minutes. Good luck!
How do you set the clock on a 2004 Pontiac Grand Am?
Push the set button and within 10 seconds push the seek and scan buttons to change time.
How do you change the clock on a 1992 Buick Skylark?
Press "SET" and then use the keys on the bottom right of the radio.
How do you change the clock in a 1992 Dodge B350 cargo van?
Press the set buttons for hour and minute.
How do you set the clock on a 1992 Cadillac?
With the ignition on, press and release the "set" button on the radio. Within 5 seconds, push the "Scan" button to set the hour, push seek to set the minutes.
How do you set the timing on a 1991 Pontiac Sunbird LE?
To set the timing on a 1991 Pontiac Sunbird LE, first, ensure the engine is at operating temperature and then turn off the engine. Connect a timing light to the number one spark plug wire and the battery, then start the engine. Locate the timing marks on the crankshaft pulley and the timing cover, and adjust the distributor as necessary to align the marks to the specified timing degree, usually around 10 degrees BTDC for this model. Finally, tighten the distributor clamp and recheck the timing to ensure it is set correctly.
