Using the minute and hour buttons at the bottom right of the radio. (4.3L Auto) Using the minute and hour buttons at the bottom right of the radio. (4.3L Auto)
disconect the battery and wait nearby until the actual time is the same as what the van clock is. be advised, this will be a life altering experiance.
how reinstall a distributor on a 1998 chevy astro, and faun time
Press and hold the set button until the clock appears, then adjust the time using the scan buttons.
Take off your distr. cap and spray some wd-40 under it. your getting moisture or water in your engine compartment.
With the key in the "on" position, but the radio off, press the "set" button, then press the scan buttons to change the hour and minutes. When the correct time is reached, press the set button again.
When was the last time the ign. wires were changed?
To set the clock on your Astro van, first locate the clock display on the dashboard. Turn the ignition to the "On" position without starting the engine. Then, press and hold the "HR" button to set the hour and the "MIN" button to set the minutes until the correct time is displayed. Release the buttons to save the settings.
How do you set the clock in 2007 equinox..Take it off military time
Ah, setting the clock in your Chevy Blazer is a wonderful opportunity to bring a little harmony into your day. Simply locate the "HR" and "MIN" buttons on your radio, press and hold them until you reach the correct time. Remember, there are no mistakes, just happy little accidents - take your time and enjoy the process.
There is a lock that keeps the wiper from coming out, use a flat screwdriver and unlock it by prying it to the side, but if it has not been removed in a long time it may still be lock in place, I had to cut mine off with a cutting wheel.
It has no Timing Belt, it has a Timing Chain.
300k if you maintain it.