you don't. it's electronically controlled. if necessary, contact dealer srvc. dept.
That vehicle is throttle body fuel injected, there is no choke or idle adjustments. You have other issues such as a large vacuum leak causing your idle problem.
The idle air is adjusted via a screw on the linkage. The gas flow is automatically set by the computer via the vari-jet inside the carburetor.
Idle is set by the computer.
Idle is automatically set by the computer with the use of an idle motor.
The idle speed is set at the factory and is NOT adjustable.
To set the idle, adjust the carburetor.
The idle is computer controlled
1,350-1,450 rpm (Shaft driven 2 3/8 turns out) (chain driven 2 turns out)
Could be the idle is set too high, maybe the mixture screw passageways are plugged up.
The IDLE is controlled by the computer. THERE IS NO ADJUSTMENT.
Idle is computer controlled and can NOT be adjusted.
To remove the metal button from the rearview mirror stem on a 1995 Olds 98 Regency, first, locate the small set screw on the stem near the base of the mirror. Use a small screwdriver or Allen wrench to loosen the screw, being careful not to remove it completely. Once the screw is loosened, gently pull the mirror away from the stem to detach it. If the button is stuck, you may need to wiggle it slightly while pulling to free it.