To set the timing on a 1986 Delta 88, first ensure the engine is at operating temperature and then remove the vacuum advance hose from the distributor. Use a timing light to check the current timing by aiming it at the timing marks on the harmonic balancer. Adjust the distributor by rotating it slightly until the timing mark aligns with the specified degree for your engine, typically around 8-12 degrees BTDC. Finally, reattach the vacuum hose and recheck the timing to ensure it remains stable.
How to change a timing chain in a 1998 Oldsmobile delta 88
turn off the radio than work the seek and tuner button
To set the timing on an Oldsmobile Delta 88, first ensure the engine is at operating temperature and then turn off the engine. Locate the timing mark on the harmonic balancer and the timing tab on the engine. Using a timing light, connect it to the battery and number one spark plug wire, then start the engine. Adjust the distributor until the timing mark aligns with the specified degree on the timing tab, usually indicated in the vehicle's service manual.
195 r60
The water pump on a 1985 Delta 88 Royal is in the engine compartment. It is located next to the timing belt.
in the driver seat of the car.
THE timing on a 88 Comanche w/inline six cyl. is set at the factory and not adjustable.
Exactly what problems are occurring?
how do you set timing on 88 s10 2.5? ?
is it disk up front drums in back
Lap and Belt
Either incorrect firing order or way to much advance in the timing.