answersLogoWhite

0

roll it off a cliff

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Why the Chevy astro of 1999 start quickly after change the fuel pump and when past a few day do not start?

Can you hear the fuel pump running when you turn the key on? How old is your fuel filter? Check these and we'll go from there.


How old do you have to be to start swearing?

Actually there is no way someone can be old enough start swearing. They do start without thinking what it looks like.


How do you replace the cylinder lock on a 1974 camaro without the old key.?

== ==


How do you install an ignition lock switch in a 93 Lincoln town car?

I Assume You Are Speaking About The Key Lock Assembly??? If So, All You Have To Do Is Turn Old Switch In Start Position Without trying to start it .Then Under The Steering Column Just Below the Key Switch.There Are 2 Holes One Is Smaller Use A 1/8 Punch And Insert Into Little Hole And Push Up on A Pin Then Hold It There While Pulling Old Lock Assembly Out .Be Careful When ReInstalling As the New Switch Also Has To Be In start Position To Install Most New Switches Are Already Set . So Now All You Do Is Push In On PIN Again And Push New Switch all The way In release Pin and Test Key Switch .....:) turn old key to ON position - if you turn it to START it will crank your handbook shows ON and START positions and states that START position cranks the engine. Therefore, turn key to ON position to remove old assembly


Programming new gm key?

Try using old key turn from "Off to on" not starting car 7 times--remove and insert new key use same procedure--then try to start w/new key. If you have 2 "old" keys do the same thing with 2nd old key before using new


What do you do after you have got the old key on club penguin?

just search everywhere and click on things or people and if they start to talk you probably hand the key to them :)


How do you program new gm key without the old one?

This can only be done by a GM dealer.


How do you start your 1999 Ford Mondeo when the immobilizer button has broken on your key fob?

if the pats transponder (the red bit) in the key is broken its a ford job, but if you have all the bits of the key hold them all right next to the ignition key hole and try to start the car before taking to ford. a friend had a worn key and had a non pats key cut, the new key wouldn't start it alone, but if he held both black bits of the new and old key together then tried, the car would start. I'm not sure if it will start if the transponder key is dangling on the same keyring, but give it a try. its cheaper than a new key from ford.


Where is the memory wire located in an 1989 Chevy S10 and how do you connect it to a new CD player?

I dont have a wiring schematic in front of me but you are looking for a wire in the old stereo connector that has 12 volts when the key is off, many people use this as their main power wire so that the stereo will work without the key but its not really made for that kind of use, the main power should be connected to the wire that has power only when the key is on.


Where is the choke located on a 2002 Chevy Impala?

your car does not have a choke like in the old days. THE COMPUTER SETS THE AIR TO FUEL TO START THE ENGINE.


How do I replace a key for my older Chevy truck?

Chevrolet has been making trucks for a hundred years. If you could tell us how old is older it would help. A local locksmith should be able to help you out by cutting a new key.


How to change ignition key lock from old to new I have old key and new lock for 1992 Chevy s10 key bolt on ignition?

you need to remove the steering wheel to reach the bolt that hold the old ignition switch need some tools that can be found at "auto zone" shop to be able to pull out the steering wheel and remove some parts to see that bolt.or you can call a car locksmith.