Try using old key turn from "Off to on" not starting car 7 times--remove and insert new key use same procedure--then try to start w/new key. If you have 2 "old" keys do the same thing with 2nd old key before using new
Check out this website http://www.cheapfobs.com/blog/key-programming/gm-mazda-ford/ worked for me :)
This can only be done by a GM dealer.
take VIN number to gm dealer, they can get you new key thru that
To reprogram a chip key for a 2001 GM vehicle, you'll typically need to have at least one working key. Insert the working key into the ignition and turn it to the "On" position without starting the engine. After 10 minutes, turn the key back to "Off" and repeat this process two more times, then insert the new key and turn it to the "On" position for 10 minutes. This should program the new key to your vehicle. If you don't have a working key, you may need to visit a dealership or a professional locksmith.
Most modern GM vehicles have a transponder in the key that prevents the starter from engaging without it. To get a new key you need to get a factory key from your dealer or an aftermarket source, then program the vehicle to accept it. Instructions on programing are generally included with the new key.
John Laurinitis is the current Raw GM
To program a GM 2273524 key fob, you typically need to follow a specific procedure that involves inserting the key into the ignition and turning it to the "On" position without starting the engine. Then, you would press and hold the "Lock" and "Unlock" buttons on the key fob simultaneously for about 15 seconds. After releasing the buttons, you can press the "Lock" button to finalize the programming. Always refer to your vehicle’s owner manual or consult a professional for precise instructions, as procedures may vary by model.
The Axxess 14 key is typically used in vehicles equipped with a factory keyless entry system that requires a specific code for programming aftermarket remote start systems or other accessories. It is often compatible with various models from manufacturers like Ford, Chrysler, and GM. Always refer to the specific vehicle's manual or Axxess documentation for compatibility details and programming instructions.
bonus on gm contract
Tire key? Do you mean a lug nut key? GM Dealer.
GM New Look bus was created in 1959.
If you lost your keys, you will have to get a locksmith to help you out. You might get lucky and find a key in the owner's manual that will be the right key for the doors. The ignition key is probably passlock and that will have to be dealt with by the nearest GM dealership.