Since that is illegal I doubt you'll get too many people telling you how to do it.
Since the SPEEDOMETER shows how fast you're currently going, then to turn it back you would just have to put on the brakes, or drive slower. Your ODOMETER shows how many Kms or Miles you've driven and it CANNOT be turned back LEGALLY.
You don't need to turn back the speedo you cheating, lying, scumbag!
You don't. That would be Illegal.
You can turn the speedometer off by removing the speedometer fuse. The speedometer fuse can be found in the fuse box. The location of the fuse is listed on the inside cover of the fuse box.
the speedometer does not work and the digital part that shows the milage does not come on also when you turn off motor the headlights at times will not turn off or they will come back on the van is equipmented with day light running lights.
The speedometer cable connects to the transmission speed sensor with a swivel nut. Simply turn the swivel nut to the right to connect the speedometer cable.
It seems as if there is a problem with the wiring between your speedometer and AC/heat unit. A licensed repairman can determine and fix the cause of this problem.
you have to pull the entire speedometer cluster on the back of it you will see little lights turn them until they come out and replace them with new ones
The 1973 Ford F2 50 pickup truck turn signal flasher unit is located behind the drivers side dashboard. The turn signal flasher unit will be near the back of the speedometer.
Your 1988 Nissan 300 speedometer cable is held in place with swivel nuts on each end of the speedometer cable. Turn the swivel nuts to the left. The speedometer cable will come off. Reverse the process to install your new speedometer cable.
The 1991 Geo speedometer cable is held in place with a swivel nut on each end of the cable. Turn the swivel nut to the left to remove the speedometer cable. Reverse the process to install the new speedometer cable.
check and make sure all the lights are on like if a turn signal is out in the front then the signal will stay on in the back when you turn the turn signal on.