0
What else can I help you with?
Why does your ignition key not turn on your 2000 Plymouth Breeze?
Had the same problem with my 1999 Breeze, all I had to do was spray the key 10w40.
When trying to start 1999 Plymouth breeze the key won't even turn what is wrong?
Just spray key wd-40, and work the key in the ignition.
Where is the turn signal flasher located on a 1998 Plymouth Breeze?
I have a 96 Plymouth breeze-- to get to the flasher, you have to take the steering column cover off. major pain in the butt.
Why does my1996 Plymouth breeze turn over with the key but will not start?
Fuel? Spark? Compression?
How do you turn of the check engine light on a 1997 Plymouth breeze?
make sure gas cap is on all the way and drive it a few tanks and see if it goes off by itself.
1999 Plymouth breeze stop running at a light and it will not turn back over but you still have power what could be wrong?
My 96 Breeze did the same thing. Sometimes it would start again, other times it didn't. I took it to the dealer (after an independent shop said "you need a new engine") and it turned out to be the cam sensor. It has run like a champ ever since.
Plymouth breeze wont turn over but it cranks?
My car starts but it shuts off it says ck engine
How do you remove thumb twist screw to get to the battery on a Plymouth Breeze?
Push up on it turn ninety degrees and pull.
How can I turn off check engine light long enough to get smogged on a 1996 Plymouth breeze?
You can reset the light with an OBD2 scan tool, but it will come right back on unless you have the problem fixed that set the trouble code in the first place.
Why would a 2000 Plymouth breeze crank and not turn over?
Have you checked for fuel and spark? Camshaft sensor and or crank sensor will cause that problem as well!
How do you reset the service engine soon light in a 1999 plymouth voyager?
To reset the "Service Engine Soon" light in a 1999 Plymouth Voyager, you can disconnect the battery by removing the negative terminal for about 15 minutes. After reconnecting the terminal, the light should reset. Alternatively, you can use an OBD-II scanner to clear the trouble codes, which will also turn off the light. However, ensure that any underlying issues are addressed before resetting the light to avoid potential engine problems.
How do you adjust the headlights on a Plymouth breeze?
To adjust the headlights on a Plymouth Breeze, first, park the car on a level surface facing a wall about 25 feet away. Turn on the headlights and mark the center of the light beams on the wall. Using a screwdriver, adjust the vertical and horizontal screws on each headlight assembly until the beams are aligned with the marks. Make sure to check that both headlights are at the same height and angle for optimal visibility.
