After repairing the cause of the code, you clear it with a scan tool.
How to reset service light on a 2004 grand am
Good Chance this is caused by a faulty O2 Sensor. I had the engine light stuck on in my 2002 Montana and replaced rear O2 sensor and it turned it off.
The "Service Engine" light is the computer's way of telling you that it has something to tell you. Connect a scanner and see what it says.
There could be several reasons why a 2000 Pontiac Grand Am service engine light soon has come on. The engine may need a tune up, the timing belt may need changed, or even a bad fuel pump.
To reset the check engine light on a 2003 Pontiac Montana, you can disconnect the negative battery terminal for about 10-15 minutes. This will clear the vehicle's computer memory and reset the light. Alternatively, you can use an OBD-II scanner to clear the codes directly. However, ensure that any underlying issues triggering the light are addressed to avoid future problems.
To reset the check engine light on a Pontiac Montana, you can disconnect the negative battery cable for about 15 minutes, which will clear the engine's trouble codes. Alternatively, you can use an OBD-II scanner to read and clear the codes directly. If the light comes back on after resetting, it's important to address the underlying issue that triggered it. Always consult a professional mechanic if you're unsure about diagnosing the problem.
remove battery cable for 1 min
pontiac g6 check engine light car with wrench
There are many causes for a service engine light. You need to have it checked for codes. Then you can diagnose from there.
To reset a Service Engine Soon light, a person can disconnect and reconnect the battery. They can also fix the problem and use a scanner to clear the codes causing the light to come on.
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
unhook positive batery cable for 5 mins