If you are having a problem with the alarm going off seemingly at random or will not disable even with the key in the lock or ignition. the problem is your battery. I have had this problem, when the security system is acting odd..get the battery checked right away, you may have to have a dealer re-program your computer also. you cannot disconect the alarm.it works with a frecuincy receiver in the pasengerdoor on the door lockswitch You can ground out factory alarm by removing driver side kick panel, finding purple wire with yellow stripe. Expose portion of wire...do not splice in half. Take piece of speaker wire, connect one end to exposed portion of purple & yellow wire, and ground other end of speaker wire to metal part of Jeep. This will disable alarm. Just did mine 2 days ago.
the aftermarket alarm kit
Check Google.com
To unhook a factory alarm system look for the alarm brain on the dash and Cut the two red and blue wires. Reconnect the wires and the alarm will be reset it self.
it could be the factory alarm system
The malfunctioning alarm system in your 1995 Jeep Grand Cherokee could be due to a faulty alarm module or a wiring issue. Start by checking the alarm system's wiring for any loose connections or shorts. You may also consider disconnecting the alarm fuse to disable it temporarily. If the problem persists, consulting a professional or replacing the alarm system may be necessary.
It is an integral part of the computer system and can not be removed.It is an integral part of the computer system and can not be removed.
i need to disable jeep factory alarm 1997 cherokee
go to www.commandocaralarms.com/wiring/1996/Jeep/Grand-Cherokee and it will have a chart of wires and wire location. i have a 1996 there all the same.
The factory alarm is built into the Body Computer. It is not possible to unhook it.
The alarm system on your Jeep Grand Cherokee is controlled by a small, approximately 3 inch square box that plugs into wiring under your dash on probably the drives side towards the middle. It is black in color and is printed with the words "alarm module. If you unplug that the alarm system will be permanently disabled and starting issues may be resolved as well.
== == We found it located in behind the right side of dash board, in behind the glove box. For our 1993 Jeep Grand Cherokee Laredo
To permanently disable the alarm on your 1996 Jeep Grand Cherokee, you can locate the alarm system's fuse in the fuse box and remove it. Alternatively, you can disconnect the battery and remove the alarm module if accessible. If the alarm system is integrated into the vehicle's wiring, consult the owner's manual or a professional mechanic for further assistance. Always ensure you have the correct wiring diagrams before making any modifications to avoid electrical issues.