unscrew the plate at the bottom and slide lower end along the floor until the pin at the top can be clear of the indent at the top of the door. Now the door should be clear and unattached!
fitted the hinges but door drops
installing a double action spring hing
To remove the door of a Samsung fridge, locate the hinge cover on the top of the door and remove it. Then, unscrew the hinge screws and lift the door off the hinge pins.
To remove the door of a Samsung refrigerator, first open the door and locate the hinge cover. Remove the hinge cover and then unscrew the hinge screws using a screwdriver. Lift the door off the hinge and set it aside.
To replace a cabinet hinge, you must first remove the screws that attach to the door with either a screwdriver or a drill with screw bit. Next you want to remove the cabinet door. Once you have removed the door, remove the hinge from the cabinet. You can then attach a new hinge. A nice tip is to have a partner hold the door while you screw the hinge back in place.
Have to remove the door, then remove pins and bushings
To install a self-closing hinge, first, remove the existing hinge from the door. Then, attach the self-closing hinge to the door using screws. Next, attach the other side of the hinge to the door frame. Adjust the tension on the hinge to control the closing speed of the door. Finally, test the door to ensure it closes properly.
To safely and effectively remove a door from its hinges, follow these steps: 1. Close the door and locate the hinge pins. 2. Use a hammer and a screwdriver to tap out the hinge pins. 3. Have someone support the door as you remove the last hinge pin. 4. Carefully lift the door off the hinges and set it aside.
Buy a hinge pin and bushing kit then rebuild the hinge on the vehicle and avoid trying to remove the hinge off the vehicle.
support the door then remove the hinge to door bolts and lift door off.
Open door look at the hinge remove two pins holding it on and remove door place it on ground, pick up new door put pins back onto the hinge well holding door and you should be done.
To effectively repair a storm door hinge, you can follow these steps: Remove the hinge from the door frame using a screwdriver. Inspect the hinge for any damage or wear. If the hinge is damaged, replace it with a new one. If the hinge is not damaged, clean it and lubricate it with oil or grease. Reattach the hinge to the door frame using screws. Test the door to ensure it opens and closes smoothly.