the same way all modern combustion engines work with fuel ,compression, and ignition
The 350 engine is a small block, not a big block.
yes with some modifing you need motor mounts and headers you can buy the kit but with a little work you can do it. the trans will not fit you need one for a small block Chevy
yes
A 350 is a small block and all the engine parts are small. The 454 is a big block and everything is big. Nothing will interchange.
You have a bad ground to the from the glow plug relay to the engine block
All Chevrolet 6's and 8's have the same bolt pattern.
It would never hold together.....
No you cannot. Big block parts are all different then small block parts. The distributor cap WILL WORK. That answer is incorrect. Big Block and small block Chevrolet distributors physically interchange with no problem (unless it's a tall deck block like a 502)
So long as the engine is a stock small block, yes - bolt that 4L60E to a turbocharged small block or a big block, and you're going to wreck that transmission quick.
yes. it should work fine.
Yes, a 700r4 will allow up to a 400ci sbc.
If you are asking if a small block chevy V8 flywheel (most common engine in a 1967 Camaro) will work on a Pontiac V8 (most common engine in a lemans), the answer is no.